The V16 Basic With Built in Auxiliary Charging system, controlling standard current pumps of up to 15A (peak) powered by +12v Leisure Battery. Allows you to vary the pump flow rate from 0-100%. Separate On Off Button Pump Protection Polarity Protection Automatically pauses the flow when dead-end (eg from a pole valve) is detected and restarts it when dead end has been removed. Indicates When the pressure switch on the pump has been activated Indicates the battery condition (voltage) of leisure and vehicle battery Charging of auxiliary battery whilst your vehicle engine is running. intelligently detects when the alternator is running and allows the alternator to charge the leisure battery, stopping it once the vehicle engine is turned off
The most advanced and yet simple to use digital pump controller on the market.
Features include: Copes easily with demanding daily use Controls water flow accurately (0-99) and dependably Auto calibration Auto flow adjustment Built in voltmeter Smart battery management Auto dead end (DE) detection Auto battery cut off, prevents permanent battery damage Works with any hose or microbore Works with pump pressure switch for additional system protection Micro DE retesting – no system pressure build when used with pressure switch (V16 version) Low Battery Cut off disable feature ( V16 Digital controls) Extends the life of pump and battery Reduces water use Extends life of resin and filters Unit is sealed to IP64, stopping water ingress Easy to use and simple to install Dead End detection detects when the water is restricted (i.e. the pole has been disconnected from the hose) and safely shuts down the pump, further reducing power consumption and wear. Simply reconnect the pole and the pump will start up again. Fine control of flow rate means water use is kept to a minimum, allowing you to complete more jobs on the same tank, as well as being eco friendly. Less water means less resin, extending the use of your cartridges. The 3 button interface is simple and intuitive to use. Battery voltage is available at the touch of a button. Electrical Specification Value Voltage 7-18V Maximum drive current 10A Typical drive currrent 2-3A Working temperature -5 to 40C Mechanical Specification Enclosure material ABS Water resistance IP64 Dimensions mm 115x65x40 Voltmeter accuracy +/- 200mV